[plt-scheme] current-load-relative-directory on stand-alone executable
I'm not sure if that is the bug that you are seeing, but a similar bug
was fixed since v203 went out. If you have the inclination, you might
try building the CVS version and trying it out. (Note: there are
pre-built binaries for windows, so you don't need a compiler or
anything like that)
Robby
At Tue, 25 Mar 2003 09:54:21 -0800 (PST), Shawn Legrand wrote:
> ------------------------------------------------------------------------------
>
> Sorry, I should have posted that - I am using Windose version 203 from the PLT site.
> Robby Findler <robby at cs.uchicago.edu> wrote:There were some bugs in the way that
> standalone modules were created
> that have been recently fixed. Can you tell me which version of
> DrScheme you're using?
>
> Thanks,
> Robby
>
> At Tue, 25 Mar 2003 09:47:18 -0800 (PST), Shawn Legrand wrote:
> > ------------------------------------------------------------------------------
> >
> > I am generating a stand-alone executable from a single module. It runs fine on my
> > system. When transporting this executable to another system along with the appropriate
> > dlls I receive the following error:
> >
> > current-load-relative-directory: directory not found or not a directory: "j:\scheme\"
> >
> >
> >
> >
> > I can see that this directory is the original directory I compiled from/into and does
> > not exist on the system I want to run from. How do I tell the compiler that it should
> > not use a fixed directory like this and use something more relative (i.e. "./")?
> >
> > Sorry if this is a commonly asked question, but I couldn't find much in the docs (at
> > least that I understood), or this list archive.
> >
> > Thanks for your help.
> >
> >
> > Shawn Legrand
> > Carpe Noctem! Carpe Diem! Hieros Gamos!
> > splegrand at yahoo.com
> > ------------------------------------------------------------------------------
> >
> > I am generating a stand-alone executable from a single module. It runs fine on my
> > system. When transporting this executable to another system along with the appropriate
> > dlls I receive the following error:
> >
> > current-load-relative-directory: directory not found or not a directory: "j:\scheme\"
> >
> >
> >
> > I can see that this directory is the original directory I compiled from/into and does
> > not exist on the system I want to run from. How do I tell the compiler that it should
> > not use a fixed directory like this and use something more relative (i.e. "./")?
> >
> > Sorry if this is a commonly asked question, but I couldn't find much in the docs (at
> > least that I understood.), or this list archive.
> >
> > Thanks for your help.
> >
> > Shawn Legrand
> > Carpe Noctem! Carpe Diem! Hieros Gamos!
> > splegrand at yahoo.com
> >
>
>
> Shawn Legrand
> Carpe Noctem! Carpe Diem! Hieros Gamos!
> splegrand at yahoo.com
> ------------------------------------------------------------------------------
>
> Sorry, I should have posted that - I am using Windose version 203 from the PLT site.
>
> Robby Findler <robby at cs.uchicago.edu> wrote:
>
> There were some bugs in the way that standalone modules were created
> that have been recently fixed. Can you tell me which version of
> DrScheme you're using?
> Thanks,
> Robby
> At Tue, 25 Mar 2003 09:47:18 -0800 (PST), Shawn Legrand wrote:
> > ------------------------------------------------------------------------------
> >
> > I am generating a stand-alone executable from a single module. It runs fine on
> my
> > system. When transporting this executable to another system along with the
> appropriate
> > dlls I receive the following error:
> >
> > current-load-relative-directory: directory not found or not a directory:
> "j:\scheme\"
> >
> >
> >
> >
> > I can see that this directory is the original directory I compiled from/into
> and does
> > not exist on the system I want to run from. How do I tell the compiler that it
> should
> > not use a fixed directory like this and use something more relative (i.e.
> "./")?
> >
> > Sorry if this is a commonly asked question, but I couldn't find much in the
> docs (at
> > least that I understood), or this list archive.
> >
> > Thanks for your help.
> >
> >
> > Shawn Legrand
> > Carpe Noctem! Carpe Diem! Hieros Gamos!
> > splegrand at yahoo.com
> > ------------------------------------------------------------------------------
> >
> > I am generating a stand-alone executable from a single module. It runs fine on
> my
> > system. When transporting this executable to another system along with the
> appropriate
> > dlls I receive the following error:
> >
> > current-load-relative-directory: directory not found or not a directory:
> "j:\scheme\"
> >
> >
> >
> > I can see that this directory is the original directory I compiled from/into
> and does
> > not exist on the system I want to run from. How do I tell the compiler that it
> should
> > not use a fixed directory like this and use something more relative (i.e.
> "./")?
> >
> > Sorry if this is a commonly asked question, but I couldn't find much in the
> docs (at
> > least that I understood.), or this list archive.
> >
> > Thanks for your help.
> >
> > Shawn Legrand
> > Carpe Noctem! Carpe Diem! Hieros Gamos!
> > splegrand at yahoo.com
> >
>
> Shawn Legrand
> Carpe Noctem! Carpe Diem! Hieros Gamos!
> splegrand at yahoo.com
>